联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究     

房成贺  陈俊平  兰孝奇  张磊 《大地测量与地球动力学》2019,39(2):169-177

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法，针对北斗单系统实时建立电离层延迟格网的不足，提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网，并利用北斗单频单点伪距定位进行精度验证。结果表明，在有效格网点覆盖充足的地区，BDS与GPS实时电离层延迟格网定位效果相当；而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数，也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

利用InSAR资料反演宁洱Ms6.4地震震源参数及库仑应力变化     

陈晨月  冯光财  高华  杨怀宁 《大地测量与地球动力学》2019,39(3):295-301

首先利用ALOS PALSAR数据，通过D-InSAR技术获取2007-06-03云南宁洱MS6.4地震的同震形变场，然后基于Okada弹性半空间位错模型反演该地震的断层几何以及精细滑动分布，最后计算宁洱地震后周边断层的静态库仑应力变化。结果表明，形变主要集中在西盘，最大视线向形变量为51.6 cm；反演得到的震源位置为23.05°N、101.02°E，深度3 km，断层走向145°，倾向49.5°，平均滑动角153°，发震断层为NNW向普洱断裂，断层活动以右旋走滑为主，兼具逆冲分量；断层面最大滑动量为1.2 m，反演得到的震级为MW619。基于库仑应力场发现，磨黑断裂处于库仑应力增加区域，而2014年景谷地震位于负值区域。结合实地考察资料和反演结果表明，宁洱地震为浅源地震，但断层并未出露地表。  相似文献   

基于GPS和水准数据的微粒群算法联合反演祁连山北缘断裂三维滑动速率     

刘杰 《大地测量与地球动力学》2019,39(9):906-909

将微粒群算法与位错理论模型相结合，采用中国地壳运动观测网络提供的青藏高原地区2001~2004年GPS测量数据和2000~2006年水准测量数据，通过常规定权和附有相对权比的方法对祁连山北缘断裂的三维滑动速率进行联合反演，并与蚁群算法反演结果进行对比。结果表明，微粒群算法收敛速度快、稳定性高，结合经典位错理论模型，是一种可以有效求解断层三维滑动速率反演问题的优化算法，在大地测量反演领域极具应用潜力。  相似文献   

Building a model-based personalised recommendation approach for tourist attractions from geotagged social media data     

Xiaoyu Sun  Xia Peng  Yiran Chen  Yu Liu 《International Journal of Digital Earth》2019,12(6):661-678

When travelling, people are accustomed to taking and uploading photos on social media websites, which has led to the accumulation of huge numbers of geotagged photos. Combined with multisource information (e.g. weather, transportation, or textual information), these geotagged photos could help us in constructing user preference profiles at a high level of detail. Therefore, using these geotagged photos, we built a personalised recommendation system to provide attraction recommendations that match a user's preferences. Specifically, we retrieved a geotagged photo collection from the public API for Flickr (Flickr.com) and fetched a large amount of other contextual information to rebuild a user's travel history. We then created a model-based recommendation method with a two-stage architecture that consists of candidate generation (the matching process) and candidate ranking. In the matching process, we used a support vector machine model that was modified for multiclass classification to generate the candidate list. In addition, we used a gradient boosting regression tree to score each candidate and rerank the list. Finally, we evaluated our recommendation results with respect to accuracy and ranking ability. Compared with widely used memory-based methods, our proposed method performs significantly better in the cold-start situation and when mining ‘long-tail’ data.  相似文献   

驯化水温及温升速率对三门湾三种虾蟹类热耐受性的影响   总被引：1，自引：1，他引：0  

田洪林  曹亮  刘金虎  窦硕增 《海洋科学》2018,42(4):43-52

作者采用动态实验法与静态实验法相结合的方法,研究了三门湾脊尾白虾(Exopalaemon carinicauda)、口虾蛄(Oratosquilla oratoria)和日本(Charybdis japonica)在不同季节的基础水温即驯化水温(8~29℃)和温升速率(0.5~15.0℃/h)下的热耐受能力。结果表明,驯化水温和温升速率对各实验动物的热耐受性均有显著影响。实验动物的热耐受性与驯化水温总体上呈显著正相关,而温升速率对热耐受性的影响具有物种特异性,并受驯化水温制约;在不同驯化水温下,各实验动物的热耐受性随温升速率增大呈不同变化趋势。各实验动物的24 h高起始致死温度受驯化水温的影响显著,随着驯化水温从8℃升高到29℃,脊尾白虾、日本和口虾蛄的24hUILT50分别从24.2、34.6、24.9℃显著增大到35.3、37.4和34.4℃。结合3种实验动物的最大临界温度分析,它们的热耐受能力依次为:日本脊尾白虾口虾蛄。研究结果可为探究三门湾水域潜在的热污染状况及其生态环境效应提供科学依据。  相似文献   

北太平洋副热带模态水盐度的年代际变化     

胡睿坤  边志刚  刘子洲  刘聪  翟方国  顾艳镇 《中国海洋大学学报(自然科学版)》2020,(2):9-21

副热带模态水(Subtropical Mode Water;STMW)在气候变化中起着重要作用。本文利用全球高分辨率数值模拟结果,研究了北太平洋STMW核心层盐度(Core Layer Salinity;CLS)的年代际变化及其物理机制。结果表明,CLS存在显著的年代际变化,其空间分布则与背景流场分布特征有关。侵蚀区CLS滞后生成区CLS约1~2年,这主要是海流平流输运引起的。生成区内,STMW的季节循环一般可分为生成期(12-4月)、隔离期(5-6月)和侵蚀期(7-11月),生成期混合层盐度(Mixed Layer Salinity;MLS)决定着隔离期和侵蚀期的CLS,而MLS年代际变化则主要由同太平洋年代际涛动存在负相关性的海表面淡水通量的变化引起。  相似文献   

边带分离型超导SIS接收机本振耦合噪声研究          下载免费PDF全文

李振强  张旭国  李积斌  左营喜  徐烨  张海龙  金风娟 《天文学报》2020,61(2):18-84

超导SIS (Superconductor-Insulator-Superconductor)接收机因极低的接收机噪声温度成为毫米波和亚毫米波段射电天文观测的首选.本振系统耦合噪声也是接收机噪声的一部分,在多年的天文观测中,发现本振耦合噪声无法完全忽略,对天文观测的灵敏度有一定影响.采用两个不同种类的信号发生器作为本振系统初级信号源,测试了超导SIS接收机的噪声温度,发现信号发生器输出的基底噪声能够耦合到接收机内部,从而增加接收机噪声强度.分析研究了本振系统热噪声和信号发生器基底噪声对接收机噪声的影响.通过在信号发生器输入端加入窄带滤波器滤除其基底噪声,消除了信号发生器基底噪声引入的接收机噪声,降低了接收机的整体噪声,提高了望远镜的灵敏度.  相似文献   

Burial and exhumation of the Hoh Xil Basin,northern Tibetan Plateau: Constraints from detrital (U-Th)/He ages     

Jin-Gen Dai  Matthew Fox  David L. Shuster  Jeremy Hourigan  Xu Han  Ya-Lin Li  Cheng-Shan Wang 《Basin Research》2020,32(5):894-915

The uplift and associated exhumation of the Tibetan Plateau has been widely considered a key control of Cenozoic global cooling. The south-central parts of this plateau experienced rapid exhumation during the Cretaceous–Palaeocene periods. When and how the northern part was exhumed, however, remains controversial. The Hoh Xil Basin (HXB) is the largest late Cretaceous–Cenozoic sedimentary basin in the northern part, and it preserves the archives of the exhumation history. We present detrital apatite and zircon (U-Th)/He data from late Cretaceous–Cenozoic sedimentary rocks of the western and eastern HXB. These data, combined with regional geological constraints and interpreted with inverse and forward model of sediment deposition and burial reheating, suggest that the occurrence of ca. 4–2.7 km and ca. 4–2.3 km of vertical exhumation initiated at ca. 30–25 Ma and 40–35 Ma in the eastern and western HXB respectively. The initial differential exhumation of the eastern HXB and the western HXB might be controlled by the oblique subduction of the Qaidam block beneath the HXB. The initial exhumation timing in the northern Tibetan Plateau is younger than that in the south-central parts. This reveals an episodic exhumation of the Tibetan Plateau compared to models of synchronous Miocene exhumation of the entire plateau and the early Eocene exhumation of the northern Tibetan Plateau shortly after the India–Asia collision. One possible mechanism to account for outward growth is crustal shortening. A simple model of uplift and exhumation would predict a maximum of 0.8 km of surface uplift after upper crustal shortening during 30–27 Ma, which is insufficient to explain the high elevations currently observed. One way to increase elevation without changing exhumation rates and to decouple uplift from upper crustal shortening is through the combined effects of continental subduction, mantle lithosphere removal and magmatic inflation.  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献